JJG mechanical agitation accelerated clarifier scraper [Applications] 1. This type of device has a dual function and precipitation reactions, for small and medium-owned drinking water and industrial water clarification treatment, generally when the influent suspended solids content of not more than When 1000mg / L, a short time does not exceed 3000mg / L, not to set a mechanical scraper; when the influent suspended solids often exceed 1000mg / L, no more than a short time 10000mg / L, required the use of a mechanical scraper. 2. When the pool diameter greater than 24m must also set up a mechanical scraper section. 3. When the suspension often exceed 5000mg / L should be added to the pre-settling tank. The turbidity is generally not more than 10mg / L, no more than a short time 50mg / L. 5. The water temperature should be greater than 2 ℃. 6. Follow-up usually takes supporting valveless filter, suspended solids up to 3-5mg / L. [Ordering] 1. industrial control applications and require a reasonable selection, marked elevation model specifications and other parameters, according S774 represents the standard does not indicate plans to order. 2. electrical control box, the drive (non-excitation control), sump, ramp or chute, mud valve, all embedded parts, etc. should be ordered. 3. underwater material (sub stainless steel, carbon steel) and corrosion, which are not specified, expressed according to carbon steel (seat body cast iron) general corrosion orders. The flow is less than 120m3 / h, and can be made of steel cell body, ordered a steel cell body or have other requirements, information on the other cable. Technical parameters